[ad_1]
When you’ve got a Spy Pen, typically it simply seems to be both caught with the sunshine on, or lifeless and will not activate. We wrote this report to point out you a few of the methods we discovered to getting your it to work once more.
1. Carry out A Exhausting Reset
Nearly all of the time, simply inserting the top of a paper clip within the opening beneath the standing mild on the again, and performing a tough reset, will get your Spy Pen working. Simply bend a small paper clip finish out, and insert straight into the opening. While you meet resistance, push frivolously, and you may really feel the reset button depressed.
Ensure that it goes straight in, and never at an angle, or you may harm a few of the elements inside. Let go and attempt to flip it on.
2. Rule Out The USB Cable
If you’re utilizing a USB cable to both join the Spy Pen to your pc, or to the 110V wall charger adapter, someday the cable will fail. When you use the USB cable as a result of you may’t join the pen on to the pc, strive simply plugging it instantly into the pc.
Do not use a USB hub, as typically there’s not sufficient energy for the it; simply join it on to the computer systems USB port. On some computer systems, use the USB port on the again, as entrance USB ports are typically weaker.
3. Rule Out The 110V Wall Charger
Identical to the USB cable, the 110V wall charger adapter may even fail sooner or later; so if it doesn’t appear to take a cost, strive charging it for Three hours within the computer systems USB port. If the standing mild is on whereas its charging, its getting electrical energy to cost the battery.
4. Put The Spy Pen Again In Video Mode
A number of Spy Pens have switches to go to photograph mode, or voice activation mode. When you transfer the swap to alter modes, and you don’t transfer it again to video mode, the pc will say it’s not acknowledged. Attempt transferring the swap again to the unique place.
5. Erase & Reformat The Spy Pen
If the Spy Pen exhibits up as a detachable drive in your PC, good click on on the icon and let go on “Format.” Then test the “Fast Format” button, then hit OK. The drive might be erased, and reformatted. This normally takes care of any pens that make it this far.
On an Apple pc, use Disc Utility to erase the drive and format as MS DOS 32. Then eject correctly; on a Mac, proper click on on the drive and choose eject. On a PC, click on on the inexperienced Left arrow down on the decrease proper a part of the monitor, then click on on eject to correctly eject the machine.
That is our report on “5 Methods To Get A Lifeless Spy Pen To Work.” In case your pen nonetheless will not work, and you bought it from us, you’ve gotten a 365-day no B.S. substitute coverage. If not, you’ll need to contact the corporate you bought it from.
[ad_2]
